In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

Today?s construction buildings contain more advanced technologies than before. The development of newer and stricter regulations to the construction industry makes the door environment more and more complex.In large construction projects the door environment is held up as a major challenge to get to in a good way. It turned out after a discussion with one project manager and a site manager at NCC, that the door environment is difficult to get right in major construction projects and it often causes many error reports in to the aftermarket after that the final inspection is completed.Interviews have been done with key figures in the building process at NCC and Akademiska hus. A study on a university building for around 3500 students and with 300 workplaces was made.

The thesis deals with evaluation of tenders for communal construction procurement. Each year the public procurement equals the value of millions of Swedish kronors, of which construction projects makes up a large proportion. These projects tend to often exceed their budgets. The aim with the thesis is to investigate if there are faults in the tender evaluation process. The theoretical framework for the study partly consists of a review on how the communal evaluation work is described in law and practice.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, Construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, Construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

This essays main focus will be on emergency shelters in disasters, and their understanding in gender awareness, by focusing on the way gender is constructed and seen. This dissertation will examine documents from Australian Red Cross and IASC (Inter Agency Standing Committee) in order to explore how they work with gender and shelter related issues. The objective is to examine and with help from these documents see how gender is constructed. The method and theory is based on Carol Bacchis; What?s the problem represented to be approach? (WPR-approach).

This term project addresses how to develop construction drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction drawings. The supervision is created as guide for similar projects.The construction drawings is a complete construction guide, hence it includes all construction drawings. In addition, a room description and a general description is included..

This research paper is a thesaurus construction for the interdisciplinary subject of landscape planning. The personnel doing the indexing of documents at the Swedish University of Agricultural Sciences had earlier expressed a need for such a work within the fields of Landscape Architecture and Landscape Engineering. However our objective was not to create a complete thesaurus, but instead a basic construction which the personnel at the Agricultural University could expand upon. The actual construction is based upon ISO 2788-1986, Documentation Ð Guidelines for the establishment and development of monolingual thesauri, and Aitchison, Gilchrist and BawdenÕs Thesaurus Construction (1997). The line of enquiry taken has dealt with the problems relating to the collection, selection and control of indexing terms.

This essay is about the problematization of uneployment and unemployed in national policy documents of the years 1979 and 2007. The purpose of this essay is to illustrate and analyze the problematization of unemployment as a construction. My overall aim is investigating how the unemployed and unemployment are represented and constructed in the Swedish political debate the years of 1979/80 and 2006/07 by analyzing national policy document. The analysis will consist of questions about the problemrepresentaion made by unemployment and the unemployed, the assumptions behind this problematization and what kind of impact it could generate for the unemployed.  In this way, the study aims to investigate the changes that may have occurred in how unemployment is problematized in the Swedish policy documents and highlight citizenship conditions on the basis of labor market policy.

Construction waste from the housing industry includes all unnecessary consumption of building materials. The definition of construction waste is construction materials that has not been built in and becomes waste. Constructions waste can be divided into two types of contributions: operational and work site contribution. Some of the common construction materials in housing industry have such low usage level as 75 % and the rest becomes construction waste. Low usage of construction materials creates unnecessary costs and has a major environmental impact.

The construction industry in Sweden has in the past 50 years had a low progress in efficiency. With a greater competition from construction firms from other countries, it is necessary to maintain the profit for Swedish construction firms. This is possible with a higher feedback of experience. This diploma work thesis examines how the two construction companies NCC and Skanska in Uppsala, Sweden handle experience feedback from previous projects and the extent to which the experience is spread and used in future projects. In this work, we examined directorial documents to see how employees shall work with feedback.

This paper investigates the grammatical construction intransitive motionconstruction with GOAL as it is used in Swedish (Swe. intransitivrörelsekonstruktion med MÅL).I examine in which ways the construction is productive, i.e. thepossibility to use the construction with new verbs as well as withordinary motion verbs with new functions. The notion of productivity isbased on the construction?s type frequency and semantic openness(Goldberg 1995, 2006; Barðdal 2008; Bybee 2010).

The aim of this study has been to explore local cultural policy documents in some municipalities in the geographical region of Västra Götaland. Do the municipalities have these kinds of documents for their local cultural activities, and how are they designed? These are questions which the study has focused on. The study has been concentrated on the library activity in the local cultural policy documents. The research has been a comparative one.

In order to accomplish that a construction is correctly built, it is critical to obtain a well functioning control mechanism throughout the project. The way to enable this is not by having an independent inspector constantly at your side. Today it is praxis to use check lists and have people responsible of quality to make sure that these are followed. This is where discretionary inspections play their part. These among others are documents needed to com-plete the check list.